UA-Ultra – An access reader with a built-in hub for complete, single-door entry control from one device.
Networking interface 10/100 MbE RJ45 port
Power method PoE+
Max. power consumption 18W
Tamper switch Yes
Speaker Buzzer
NFC frequency 13.56 Mhz
NFC read range < 50 mm
Operating temperature -30 to 40Ā° C
UA-Hub-Door is an intelligent IP networked single door controller, a part of UniFi Access solution. Comes with versatile interfaces, including support for most electric bolts/strikes, magnetic locks, and 12V access accessories such as motion sensors, push buttons, and alarms. The three Ethernet PoE powered reader interfaces minimize need for wiring work and offer a convenient way to add a UniFi G3-Flex surveillance camera for additional security. The seamlessly integrated UniFi Access solution is managed with UniFi Access Controller software. Easily manage users, visitors, schedules, and access policies with the with the intuitive browser-based interface.
Networking interface (5) 10/100/1000 Base-T
Power method PoE++
Max. power consumption Without PoE output: 30W, With PoE output: 50W
PoE input 50V DC, 1A
PoE output PoE passthrough, (4) PoE, 50V DC, total 20W
Indoor use only
UVC-AI-Turret-W – All-weather, vandal-proof 4K PoE+ turret camera with enhanced AI capabilities and IR and visible LEDs for night vision.
Sensor 1/1.8″ 8MP
Lens Type Fixed Fokal Lens
View angle H: 109.9Ā°, V: 56.7Ā°, D: 134.1Ā°
Night mode Built-in IR LED illumination and IR cut filter
IR distance 40 m
Resolution 8MP 3840 x 2160 (16:9)
Max. frame rate 30 FPS
Processor Quad-core ArmĀ® CortexĀ®-A53 based chip
Networking interface GbE RJ45 port
Max. power consumption 20W
Power method PoE+
Supported voltage range 42.5ā57V DC
Operating temperature -30 to 50Āŗ C
WM6409 19″ 6U 600×450 (assembled)
Dimension: 600 x 368 x 450 (+/- 2mm)
Type Cabinet: Wall mounted, assembled
Capacity: 6U
Material: Cold rolled steel SPCC, powder coated
Front door: Tempered glass with lock
Color: Black RAL9004
Fiberglass remote control FRP for pulling cables Ć6mm, 150m
Flexible extension material: Polyester
Product colour: Yellow
Dimensions: 55x20x70cmĀ
Rod diameter: 6mm
Rod length: 150mm
Rod material: Fiberglass
FO Distribution Box GFP-12C-BL
2 optical fiber cable inlets
12 optical fiber cable outlets
Material: PC+ABS
Colour: Black
Dimensions: 70x240x230 mm
Protection: IP65
Integrated weld tray – tilted
Number of slots for adapters: 12 (SC simplex/LC duplex)
Operating temperature: -40Ā°C~+60Ā°C
Equipment:
Welding covers
Plastic clamps
Protective tube for spreading fibers
Pegs and screws for wall mounting
Door lock key
Insulation tape
Rubber sleeves for subscriber exits
TELCOLINE 4J microADSS, UniTube, Heavy Duty, TPU, SM, G.657A2, black
Fiber type: SM, G.657A2
Number of fibers: 4
Number of tubes: 1
Diameter: 3.3 mm
Installation type: Aerial installations (span up to 80m), FTTH, Access networks, Last mile, Microduct systems
Outer sheath: TPU
Operating temperature range: ā 30 ā 70Ā°C
TELCOLINE 8J microADSS, UniTube, Heavy Duty, TPU, SM, G.657A2, black
Fiber type: SM, G.657A2
Number of fibers: 8
Number of tubes: 1
Diameter: 3.6 mm
Installation type: Aerial installations (span up to 80m), FTTH, Access networks, Last mile, Microduct systems
Outer sheath: TPU
Operating temperature range: ā 30 ā 70Ā°C
ZTT 4J microDUCT, UniTube, Ć2.4 mm, SM, G.657A1
Fiber type: SM, G.657A1
Number of fibers: 4
Number of tubes: 1
Diameter: 2.4 mm
Installation type: Cable microducting, microducts, inside the facility (in LSOH tubes)
Outer sheath: HDPE – black
Operating temperature range: ā 20 ā 60Ā°C
SC/APC-SC/APC SM SX transparent cap, Gold Class
Assortment: Fiber Optic Coupler
Mode: Singlemode
Simplex
Connector: SC/SC (APC)
UniFi AC In-Wall Access Point UAP-AC-IW is a dual-band 802.11AC WiFi Access Point powered from an Ethernet wall connection. It features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network.
Number of 1GbE ports 3
PoE interface (1) PoE/PoE+ in, (1) PoE out
Power method PoE, PoE+ (Required for PoE passthrough)
Power supply UniFi PoE switch (Not Included)
PoE out 48V pass-through
Max. power consumption 7W (Excluding PoE output)
Max. PoE wattage per port by PSE 19W
Wireless 2.4 GHz (1 dBi), 5 GHz (2 dBi)
MIMO (DL MU-MIMO) 2.4 GHz (2×2), 5 GHz (2×2)
Operating temperature -10 to 50Ā°C
Power Method (1) 54V, 1.1A power adapter (Included), PoE++
Power Supply 54V, external, 1.1A/60W
Supported voltage range 44ā57V DC
Max. power consumption 9W with PoE input (Excluding PoE output), 8W with AC adapter input (Excluding PoE output)
Total available PoE
PoE++ input: 42W
PoE+ input: 16W
60W PoE adapter input: 42W
60W AC adapter input: 52W
210W AC adapter input: 202W
Max. PoE+ wattage per port by PSE 30W
Power Method Passive 24V, 2Pair PoE In
Power Supply POE-24-30W-G-W PoE Adapter (Not Included)
Typical Power Consumption 1.5W
Max. Power Consumption 30W
Total Passive PoE Max. Wattage 24V, 2Pair, 1A for 3 Ports (30W)
Passive PoE Max. Wattage per Port 24V, 2Pair, 1A per Port (24W)
Passive PoE Voltage Range 21.6 – 30V
Operating Temperature 30 to 70Ā° C
Number of 1/2.5 GbE ports 8
Number of 10G SFP+ ports 2
Power method (1) Universal input, 100ā240V AC, 50/60 Hz, (1) USP-RPS DC input
Layer 3 features
DHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs
Etherlightingā¢
Locating, Speed/link, Native VLAN/network
S/FTP Cat6 LSZH RJ45 7m DK-1644-070
2x RJ45 (8P8C) connectors
Boots with kink protection, strain relief and latch protection
Length marking on boot
Conductor: Copper (Cu)
Configuration: 1:1
Connector 1: Modular RJ45 (8/8) plug
Connector 2: Modular RJ45 (8/8) plug
Packaging: DIGITUS Polybag
Category: CAT 6
Shielding: S-FTP, pairs in metal foil and braid shielding
Length: 7 m
Color: grey
Jacket: LSOH
Structure: 4 x 2 AWG 27/7, twisted pair
SF/UTP Cat5e PVC RJ45 10m DK-1532-100
2x RJ45 (8P8C) connectors
Boots with kink protection, strain relief and latch protection
Length marking on boot
Assortment: Twisted Pair Patch Cables
Configuration: 1:1
Connector 1: Modular RJ45 (8/8) plug
Connector 2: Modular RJ45 (8/8) plug
Packaging: DIGITUS Polybag
Category: CAT 5e
Shielding: SF-UTP, foil and braid shielding
Length: 10 m
Color: grey
Jacket: PVC
Structure: 4 x 2 AWG 26/7, twisted pair
SF/UTP Cat5e PVC RJ45 30m DK-1532-300
2x RJ45 (8P8C) connectors
Boots with kink protection, strain relief and latch protection
Length marking on boot
Assortment: Twisted Pair Patch Cables
Configuration: 1:1
Connector 1: Modular RJ45 (8/8) plug
Connector 2: Modular RJ45 (8/8) plug
Packaging: DIGITUS Polybag
Category: CAT 5e
Shielding: SF-UTP, foil and braid shielding
Length: 30 m
Color: grey
Jacket: PVC
Structure: 4 x 2 AWG 26/7, twisted pair
Supervoice SVC-121 is a professional HD mono headset with advanced uni-directional noise cancelling microphone and quick-disconnect (QD) cable, ideal for office and call-center staff. With super light weight design, 60mm adjustable steel headband, 330Ā° rotatable microphone boom and 180Ā° rotatable joint of speaker and headband, ensures exceptional user comfort for all day use. This headset is compatible with all IP and analog devices, enabling multiple connection choices with the optionally available QD bottom cables, such as QD to RJ9, QD to 3.5mm stereo plug, QD to USB 2.0 and more.
Audio Monaural
Noise Cancelling MicĀ
Anti Acoustic Shock CircuitĀ
HD AudioĀ
Mic Frequency RangeĀ
Quick Diconnect (QD)Ā
USB Not included
Rotatable Microphone Arm
Ear Cushion Type Leather
Telephony IntegrationĀ
The Ubiquiti PowerBeam 5AC ISO Gen2 supports up to 450+ Mbps real TCP/IP throughput and features improved surge protection. The integrated isolator design also spatially filters out interference, so the PBE-5AC-ISO-Gen2 delivers improved noise immunity in co-location deployments. It also features a rear housing with a metal-plated interior, designed to enhance RF shielding, and an included protective radome, to shield the PowerBeam 5AC ISO Gen2 from harsh weather conditions.
Processor MIPS 74Kc
Memory 64 MB
Antenna Gain 25 dBi
Power supply 24 V, 0.5 A Gigabit PoE Adapter
Max Power Consumption 8.5 W
Power Method Passive PoE
Operating Temperature -40 to 70Ā°C
GWN7660E Enterprise-Grade Wi-Fi 6 Access Point is an enterprise-grade 802.11ax Wi-Fi 6 access point that allows businesses to build next-generation Wi-Fi networks for high-density environments. It offers 2×2:2 MU-MIMO technology on the 2.4G band and 3×3:2 MU-MIMO on the 5G band.
Wireless 2.4 GHz 802.11b/g/n/ax, 5 GHz 802.11a/n/ac/ax
Antenna gain 2.4 GHz x2 (4 dBi), 5 GHz x3 (5 dBi)
MIMO 2Ć2:2 2.4GHz, 3×3:2 5GHz
Number of 1GbE ports 1 autosensing
WP8264 – Cordless Wi-Fi IP Phone with Integrated Dual-Band Wi-Fi 6 802.11a/b/g/n/ac/ax and 12-hour talk time. The WP826 includes advanced antenna design and roaming support. By adding 12-hour talk time and HD voice with dual-MICs, the WP826 offers an affordable option and comes equipped with a combination of features, mobility and durability to suit all portable telephony needs.
Protocols/Standards SIP RFC3261, DNS (A record, SRV, NATPR), DHCP, SSH, NTP, STUN, LDAP, TR069, SNMP, STRP, RTP/RTCP, RTCP-XR, TFTP, SIMPLE, HTTP/HTTPS, TCP, UDP, TLS, ARP, ICMP, IPv4, IPv6, 802.1x
Voice Codecs and Capabilities G.729A/B, G.711Āµ/a-law, G.726, G.722(wide-band), G.723, iLBC, Opus, in- band and out-of-band DTMF (in audio, RFC2833, SIP INFO), VAD, AEC, CNG, PLC, AGC, AJB, Headset Noise Shield
Bluetooth Integrated
Wi-Fi Integrated dual-band Wi-Fi 6 802.11 a/b/g/n/ac/ax (2.4GHz & 5GHz). 802.11k/r/v Supported
Auxiliary Ports Type-C charging interface (supports fast charging)
Telephony Hold, transfer, forward, 4-way audio conference, call park, downloadable phonebook (XML, LDAP, up to 1000 items), call waiting, call log (up to 200 records), auto answer, click to dial, flexible dial plan, personalized music ringtones, server redundancy and fail-over, push-to-talk
HD Audio The handset is broadband audio, and the speaker is narrowband audio, supporting HAC and dual Mic.
QoS Supports Layer 3 QoS (Tos, DiffServ, MPLS, DSCP)
GRP2601W is an essential 2-line model designed with zero-touch provisioning for mass deployment and easy management. It features a sleek design and a suite of next-generation features including 5-way voice conferencing to maximise productivity, EHS support for Plantronics, Jabra, and Sennheiser headsets and multi-language support.
Protocols/Standards SIP RFC3261, TCP/IP/UDP, RTP/RTCP, RTCP-XR, HTTP/HTTPS, ARP, ICMP, DNS(A record, SRV, NAPTR), DHCP, PPPoE, SSH, TFTP, NTP, STUN, SIMPLE, LLDP, LDAP, TR069, SNMP, 802.1x, TLS, SRTP, IPv6
Network Interfaces Dual switched auto-negotiation 10/100 Mbps Ethernet ports
Wi-Fi (2.4GHz)
Voice Codecs and Capabilities Support for G.729A/B, G.711Āµ/a-law, G.726, G.722(wide-band), G.723,iLBC, OPUS, in-band and out-of-band DTMF(in audio, RFC2833, SIP INFO), VAD, AEC, CNG, PLC, AGC, AJB
Auxiliary Ports RJ9 headset jack (allowing EHS with Plantronics & Jabra &Sennheiser headsets)
ROC Drop Cable Slitter, Fiber Access Tool MS-ROC
Cut Type Shave
Number of Shaving Grooves 2
Cable Type Outer Jackets, Loose Buffer Tubes
Cable Diameter 4.2 mm-5.5 mm
Dimensions 6.6 x 4.09 x 4.57 cm
Weight 70.824 g
Mid Span Shaving Tool, 1.0 mm-3.3 mm MS-600
Cut Type Shave
Number of Shaving Grooves 6
Cable Type Outer Jackets, Loose Buffer Tubes
Cable Diameter 1.0 mm-3.3 mm
Weight 38.13Ā g
Mid Span Slit & Ring Tool, 1.2 mm-3.3 mm MS-306
Cut Type Slit, Ring
Number of Slitting Grooves 6
Number of Ringing Grooves 6
Cable Type Outer Jackets, Loose Buffer Tubes
Cable Diameter 1.3 mm-3.3 mm
Dimensions 5.0 cm x 3.9 cm x 4.1 cm
Weight 67.19Ā g
Fiber Optic Drop Cable Slitter FOD-2000
Application Flat Cable Slitting
Cable Type Flat Drop cables
Maximum Cable Width 8.89 mm
Dimensions 11.43 x 8.89 x 4.13cm
Weight 77.18 g
UAP U7 Outdoor is a WiFi 7 access point with 4 spatial streams and a built-in directional super antenna, offering extremely high-throughput WiFi 7 connectivity for 200+ connected devices with open space coverage of up to 465 mĀ². This access point features IPX6 weatherproofing, meaning it can withstand jets of water from any direction, and supports PoE+ powering.
Number of 1/2.5GbE ports 1
WiFi standards 802.11a/b/g/n/ac/ax/be (WiFi 6, WiFi 7)
MIMO (DL/UL MU-MIMO) 2.4 GHz (2×2), 5 GHz (2×2)
Antenna gain
2.4 GHz Directional internal: 8 dBi/External omni: 3 dBi
5 GHz Directional internal: 12.5 dBi/External omni: 4 dBi
Power method PoE+, 42.5-57V DC, 19W
Operating temperature -30 to 60Ā°C
Weatherproofing IPX6
Application Requirements
UniFi Network Version 8.0.7 and later
UCG-Max is a compact quad-core UniFi Cloud Gateway with 30+ UniFi device / 300+ client support. Designed for high-performance networking for demanding small-to-medium sites, offering full 2.5GbE support and a sophisticated suite of networking, security and performance software features. The UCG-Max provides up to 1.5Gbps IPS routingĀ and can be managed with either a CloudKey, a UniFi Network Server or Official UniFi Hosting.
Features
License-free SD-WAN
One-click Teleport and Identity Enterprise VPN
Application-aware firewall rules
Signature-based IPS/IDS threat detection
Content, country, domain, and ad filtering
VLAN/subnet-based traffic segmentation
Full stateful firewall
Processor Quad-core ARMĀ® CortexĀ®-A53 at 1.5 GHz
System memory 3 GB DDR4
On-board storage 512 GB NVMe SSD
Number of 1/2.5GbE ports 4 LAN, 1 WAN
Power method USB type C (5V DC/5A)
Supported voltage range 100ā240V AC
Max. power consumption 16.1W
Operating temperature -10 to 40Ā°C
Application Requirements
Mobile app UniFi iOSā¢ and Androidā¢: Version 10.17.2 and later
Mini Optical Power Meter 30mw, -50ć+26dBm
Measurement range: 800nm ~ 1700nm: -50 ~ +26dbm
Measurement accuracy: Ā±5%
Connector: FC/SC/ST
Power supply: Two Batteries No. 7/700mAh Rechargeable Lithium Battery
Automatic shutdown: 10 min
Operating temperature: -10Ā°C ā 50Ā°C
Optical Fiber Identifier
Wavelength 800nm-1700nm
Pass through insertion loss 250um / 900um optical fiber: 1.0dB
2.0 / 3.0 optical fiber: 1.5dB
Application of optical fiber 250um/900um/2mm/3mm optical fiber
Identified Signal Type 270Hz/1KHz/2KHz
Display LED color screen
Detector type InGaAs
Power supply 2*AA 1.5V Alkaline Battery
Rechargeable Visual Fault Locator SUR535 50mw
VFL Output Power 50mW
VFL Wavelength 650nm
VFL Flashing Frequency 2Hz
Connector 2.5mm universal connector
LED 4LEDļ¼50mWļ¼
Battery 18650 Lithium battery 3.7V 2200mAh
Mobile Power Output 5V/1A
Rechargeable Visual Fault Locator SUR535 30mw
VFL Output Power 30mW
VFL Wavelength 650nm
VFL Flashing Frequency 2Hz
Connector 2.5mm universal connector
LED 4LEDļ¼50mWļ¼
Battery 18650 Lithium battery 3.7V 2200mAh
Mobile Power Output 5V/1A
LC/PC-LC/PC MM OM4 DX 1m
Assortment: Fiber Optic Patch Cables
Mode: Multimode
Duplex cable, OM4
Connector 1: LC
Connector 2: LC
Length: 1 m
mAP lite is the smallest wireless access point! You can carry it anywhere: use as a travel router to extend that hotel internet to all your devices, or as a client device to improve your laptop signal range, the tiny mAP lite will be always with you. It can also serve as a simple configuration tool for your servers, if there is no ethernet on your mobile device.
CPU QCA9533 650MHz
Size of RAM 64 MB
Storage size 16 MB, Flash
Number of Fast Ethernet ports 1
Wireless 2.4 GHz 802.11b/g/n, dual-chain
Antenna gain 1,5 dBi
hEX refresh stronger than ever due to the modern ARM CPU and extra RAM.
Five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a full size USB port. It comes with a very powerful dual core 950MHz ARM CPU and 512MB RAM, capable of all the advanced configurations that RouterOS supports.
CPU Dual-core EN7562CT 950MHz
Size of RAM 512 MB
Storage size 128 MB, NAND
Number of 1GbE ports 5
USB 1, type A 2.0
Mobile Magnetic SMA Antenna Teltonika
Frequency 699~868/1850~2690 MHz
Polarization Linear
Gain 1.0 dBi
VSWR 3.0
Impedance 50 Ī©
Cable RG174, 3000 mm
Connector SMA Male
Mounting Method Magnet
RoHS Compliant
GF3 – Cable pulling system without meter counter 10198 GF3 – 50 m
Fiberglass rod Ć 3 mm
Bending radius: 38 mm
Total breaking load: 130 kg
Recommended tube-Ć: 10 – 50 mm
Weight: 1,374
Accessory box: 1 x guiding head with twist adjustment, 1 x kink protection ending joint RTG Ć 6 mm, 1 x pull-in aid, 1 x special adhesive 3 g, 1 x cable pull loop (Ć 14 mm outside), 6 x adhesive sleeves Ć 3 mm, 3 x pull eyes Ć 7 mm, 1 x starting bulb Ć 11 mm, 1 x connecting sleeve, 2 x mounting-wrenches.
XB 300 + Multifunction mandrel Set
XB 300 Cable Roller
Dimensions: L 291 x B 291 x H 101mm
Diameter: Ć 300mm
Weight: 1,26kg
Load bearing capacity: 300kg
Drum width: variable
Height: 105mm
Mandrel-Ć: 15 mm / 45mm
Multifunction mandrel
Suitable for XB 300, XB 500 and XB 500 T Cable roller
Diameter: Unfolded: Heigth 294 mm, Ć 430 mm Closed: Height 196 mm, Ć 72 mm
Weight: 0,49 kg
Material: Special plastic
Masterlan outdoor STP coupling, Cat.5e/6/7, IP68, RJ45-RJ45
Category Cat5e/6/7
Shielding Yes
Type of coupler Classical (RJ45-RJ45)
Purpose Outdoor
Dimensions 110 x 30 x 30mm
WM 19″ 4U 600×450 (not assembled) Extralink
Dimension: 600 x 450 x 280mm
Type Cabinet: Wall mounted, ready to assemble
Capacity: 4U
Material: Cold rolled steel SPCC
Front door: Tempered glass, lock
Color: BlackĀ
UX – UniFi Express is a compact networking solution that combines the power of a UniFi Cloud Gateway and a WiFi 6 access point in one unit. Operating as a versatile mesh access point, it delivers high-performance wireless connectivity with built-in WiFi 6 technology (2×2 MIMO). Despite its small size, it covers 140 mĀ²Ā and supports over 60 connected WiFi devices, making it ideal for home and small office environments.
Number of 1GbE ports 1 LAN, 1 WAN
Wireless 2.4 GHz (4 dBi), 5 GHz (5.15 dBi)
MIMO 2 x 2 (DL/UL MU-MIMO)
Throughput rate 2.4 GHz/573.5 Mbps, 5 GHz/2.4 Gbps
WiFi standards 802.11a/b/g/n/ac/ax
Power method USB type C (5V DC/3A)
Max. power consumption 10W
Operating temperature -10 to 45Ā°C
Application Requirements
UniFi Network Version 8.0.7 and later
*Please Note: With UniFi Express you can manage a maximum of 4 UniFi network devices!
Wave-Pro is a high-capacity 60 GHz radio designed for long-range outdoor networking applications. It supports both Point-to-Point (PtP) and Point-to-MultiPoint (PtMP) configurations, making it highly versatile for various networking scenarios. Equipped with a 60 GHz primary radio, the Wave-Pro offers a maximum throughput of 5.4 Gbps (2.7 Gbps duplex), ensuring robust, high-speed data transmission over distances up to 15 km in PtP mode and up to 8 km with a Wave AP in PtMP mode. This capability is particularly useful in setups requiring high bandwidth across extended distances without the need for extensive cabling.
Processor Quad-core ARMĀ® CortexĀ®-A53 at 1.4 GHz
System Memory 512 MB DDR3L
Networking interface 2x 2.5GbE RJ45 port, 1x 10G SFP+ port
Power supply 48VDC, 0.65A 2.5GbE PoE adapter (included)
Operating mode PtP, PtMP station
Ubiquiti specific features Integrated 60 GHz radio, discovery protocol, Wave technology
Total throughput 5.4 Gbps (2.7 Gbps duplex)
Max. range PtP: Up to 15 km
Max. range PtMP: Up to 8 km (Wave AP), up to 6 km (Wave AP Micro)
Antenna gain 46 dBi
WiFi Standard 802.11ax (WiFi 6)
Operating temperature -40 to 60Ā°C
Round Cable Strip & Ring Tool CST-1900
Cut Type Slit, Ring
Cable Type Jacket, Round Distribution
Cable Diameter 4.5 mm-29 mm
Blade Depth 0 mm-3 mm
Overall Length 133 mm
Dimensions 13.7 cm x 3.78 cm x 3.04 cm
Weight 95.34 g
Mini Optical Power Meter -50 to +26dBm FPM-50S
Connector Types FC (APC/PC/UPC) & LC (PC/UPC)
Calibrated Wavelengths (nm) 850, 980, 1270, 1300, 1310, 1490, 1550, 1577, 1625, 1650 nm, ā¤ Ā± 0.2 dB
Detector Type InGaAs
Measurement Range -50 dBm to +26 dBm
Resolution 0.01 dB
Operating Time ā„ 120 hours
Battery Type (2) AAA batteries
Dimensions 11.06 cm x 6.76 cm x 2.76 cm)
Weight 136.2 g
Round Cable Strip & Ring Tool for Cables Ć4.5-29 mm CST-1140
Cut Type Slit, Ring
Cable Type Jacket, Round Distribution
Cable Diameter 4.5 mm – 29 mm
Max Jacket Thickness 0.1 mm – 3.0 mm
Overall Length 13.66 cm
Dimensions 15.88 cm x 5.59 cm x 4.83 cm
Weight 149.82 g
Probe Pick JIC-22035NT/10
End Type Uninsulated L Hook, Notched Flathead
Hook Diameter 1.59 mm
End Dimensions 4.76 mm wide, 1.59 mm thick
Material ABS
Length 17.145cm
Weight 4.54 g
Insulated Tool Kit 11pcs TK-110INS
Tested To 10,000 VAC
Rated To 1,000 VAC Live
Standards IEC 60900, ASTM F1505-01, VDE
Product Material Chrome Vanadium Steel
Weight 2052.08 g
Kit includes
INP-1072 Insulated Lineman’s Combo Pliers, 7 1/2″
INP-2065 Insulated Long Nose Pliers, 6 1/2″
INP-3062 Insulated Diagonal Pliers, 6 1/4″
INP-4065 Insulated Wire Stripper, 6 1/2″
INS-180 Phillips Insulated Screwdriver, #1 x 3″
INS-2100 Phillips Insulated Screwdriver, #2 x 4″
INS-3150 Phillips Insulated Screwdriver, #3 x 6″
INS-4100 Cabinet Slotted Insulated Screwdriver, 5/32″ x 4”
INS-475 Cabinet Slotted Insulated Screwdriver, 1/8″ x 3″
INS-6150 Cabinet Slotted Insulated Screwdriver, 1/4″ x 6″
INS-8175 Cabinet Slotted Insulated Screwdriver, 5/16″ x 7″
TKC-110 Rugged 11 Pocket Tool Case
Insulated Fuse Puller FP-600INS
Jaw Length 46.04 mm
Jaw Thickness 7.94 mm
Jaw Width 12.70 mm
Tested To 10,000 VAC
Rated To 1,000 VAC Live
Standards IEC 60900
Dimensions 16.51 cm x 5.72 cm x 2.54 cm
Weight 177.06 g
Quick SleeverĀ® PSI-15
Cable Type Fiber Optic
Maximum Capacity 15 Protection Sleeves
Sleeve Length 40 mm-60 mm
Dimensions 66 mm x 34 mm x 21 mm
Weight 27.24 g
Microduct Tube Cutter MDC-14
Maximum Duct Diameter 14.28 mm
Overall Length 133 mm
Blade Material Stainless Steel
Product Material Stainless Steel
Weight 59.928 g
Buffer Tube Binder Ripper Tool BRT-100
Total Length 142 mm
Length 14.0335cm
Weight 98.972 g
Mid Span Slit & Ring Tool, 2.9 mm-6.8 mm MS-316
Cut Type Slit, Ring
Number of Slitting Grooves 5
Number of Ringing Grooves 5
Cable Type Outer Jackets, Loose Buffer Tubes
Cable Diameter 2.9 mm-6.8 mm
Dimensions 6.0 cm x 3.9 cm x 4.1 cm
Weight 72.64 g
Round Cable Strip & Ring Tool, 8-28 mm CST-900
Cut Type Slit, Ring
Cable Type Jacket, Round Distribution
Cable Diameter 8 mm – 28 mm
Dimensions 13 cm x 3 cm x 2.8 cm
Weight 68.1 g
Fiber Optic Stripper, Three Hole JIC-375
Cable Type Jacket, Buffer, Fiber Optic
Strip Diameter 250 micron, 600-900 micron, 1.6 mm-3.0 mm
Handle Material TPR (Thermoplastic Rubber)
Length 15.24cm
Weight 99.88 g
Long Nose and Side Cutting Pliers JIC-842
Cutter Length 12.7 mm
Jaw Length 47.63 mm
Jaw Thickness 9.53 mm
Jaw Width 17.46 mm
Product Material Chrome Vanadium Steel
Length 17.272cm
Weight 158.9 g
Rugged 21 Pocket Tool Case H-90
Dimensions 279.4 mm x 203.0 mm x 254 mm
Material PVC Coated 600D Polyester
Weight 1430.1 g